©
2016 DJI. All Rights Reserved.
2. Attach the grips to the handle bar and lock them in the preferred position.
Installing the Handle Bar onto the Gimbal
1. Place the handle bar in position, as shown below, then slide it horizontally into the gimbal and
tighten the knob.
2. Holding the gimbal by the grips, make sure that the gimbal is not obstructed during a 360
degree pan. The installation is complete.
DJI Intelligent Battery
Before you start using your Ronin-MX, be sure to charge the battery. The DJI Intelligent Battery was
specially designed for the Ronin-MX. It has a capacity of 1580 mAh, a voltage of 14.4 V, and a variety
of power management functions. Only charge the DJI Intelligent Battery with DJI approved charger
(MODEL BC235144015). When the DJI Intelligent Battery is fully charged, the Ronin-MX has a
maximum run-time of three hours.
DJI Intelligent Battery Charger
