dji MG-12000P, User Manual

Page: 6 / 27

5
25%~37%
13%~24%
0%~12%
LED Patterns During Charging
During charging the LEDs indicate the current battery level. (Note: During charging, if a battery
exception has occurred the LEDs indicate which exception has occurred. Refer to the Battery
Exception LED Pattens section for further information.) Disconnect the battery when charging is
complete.
LED1 LED2 LED3 LED4 Battery Level
0%~49%
50%~74%
75%~99%
100%
Battery Exception LED Patterns
If a battery exception occurs during charging the LEDs indicate which exception has occurred.
(Note: During charging, if no battery exception has occurred the LEDs indicate the current battery
level. Refer to the Battery Level LED Patterns section for further information.)
To check for battery exceptions while the battery is not being charged press the Battery Level
Indicator button once. (Note: If no battery exception has occurred, when the Battery Level Indicator
is pressed the LEDs indicate the current battery level. Refer to the Battery Level LED Patterns
section for further information.)
Battery exceptions may also be lead to a warning being displayed in the mobile device app used
when flying the aircraft.
The battery can self-recover from some battery exceptions. If one of the following battery exceptions
occurs, let the battery rest for a while to attempt self-recovery:
LED1 LED2 LED3 LED4 Pattern Battery Exception Item
LED2 blinks twice per second Overcurrent detected
LED3 blinks twice per second Overcharge detected
LED3 blinks three times per
second
Battery charger over-voltage
LED4 blinks twice per second
Charging temperature is too
low
LED4 blinks three times per
second
Charging temperature is too
high
LED1 and LED4 blinks
Difference between cell
voltages is too large
LED2 and LED3 blinks Battery firmware update failure