dji MATRICE 200 series, User Manual

Page: 37 / 140

© 2018 DJI All Rights Reserved.
37
MATRICE 200 Series
User Manual
_
_
_
_
_
D-RTK and Datalink Pro
Introduction
For the M200 series, you can only activate D-RTK and Datalink Pro with the M210 RTK. Be sure to
BDUJWBUFCP*"TTJTUBOUCFGPSFmSTUUJNFVTF
Using dual antennas, D-RTK provides more accurate heading data than a traditional single antenna
system, and it can withstand magnetic interference from metal structures. Depending on the region
of purchase, the D-RTK uses either GPS and BeiDou or GPS and GLONASS to perform at the
highest standards. The Datalink Pro is used to transmit the real-time data wirelessly.
Both D-RTK and Datalink Pro are composed with the air system and ground system. It is
recommended to use them in an open environment free from radio interference. Ensure the
antennas are unobstructed when in use. This manual uses the Datalink Pro 900 as an example.
Please refer to the D-RTK and Datalink Pro user guides for more details.
Activating D-RTK and Datalink Pro
IMPORTANT: The Ground System and Air System of both D-RTK and Datalink Pro should be
connected to the computer separately and activated. Be sure to configure parameters with DJI
"TTJTUBOUGPSmSTUUJNFVTF
1. Download DJI Assistant 2 from www.dji.com and install it on your computer.
2. Connect the aircraft to the computer and toggle the USB Mode Switch to the RTK position to
activate the D-RTK air system.
3. Connect the D-RTK Ground System to the computer with DJI Assistant 2 launched for activation.