background image

AGRAS  MG-1  User  Manual 

©  2016  DJI.  All  Rights  Reserved.                                                                                                                                                                     

  3 

Installation 

Mounting the Landing Gear 

 

 

The  structures  of  the  two  landing  gear  legs  are  different.  The  one  with  a  compass  cable  should  be 

mounted to the right side of the aircraft (with its tail facing you). 

1. Mounting the right landing gear leg 

There is a compass cable in the landing gear leg. Connect the compass cable before mounting the landing gear leg.   

Connect the compass cable to the compass port in the landing gear mount on the right side of the center frame. 

Use tools such as tweezers if needed. 

Mount the landing gear leg to the center frame. DO NOT damage the compass cable. 

Insert and tighten M3x10 screws.   

 

2. Follow the step 2 and 3 above to mount the left landing gear leg. 

 

 

Aircraft

s Tail 

Compass  Cable 

(For  the  right  landing  gear  leg  only) 

Compass Port 

Compass Cable 

Hose  Bracket 

Summary of Contents for AGRAS MG-1
































Reviews: