Replace seat pad by
reversing order:
Put pad on headrest and
replace harness guides.
Make sure harness
guide’s tab goes over
metal bar.
Starting from bottom of
child restraint, slip pad on
shell; tuck in pad around
harness adjuster and
over upper belt guides.
Make sure pad is under
headrest and replace
lower harness guides.
Replace the headrest pad
by starting from the top.
Rethread harness (see
belt-positioning booster
section).
From the back, use a
screwdriver to press in
on lip of harness guide
and pop guides through
the front. Pull cover off
headrest.
50
51
6
Depending on your model,
to remove the headrest
pad, pull pad off of the
headrest tab located by
the harness/headrest
adjuster, then pull pad off
of headrest.
6A
Adjust backrest to lowest
position. Work pad off
shoulder belt positioning
guides and off of headrest.
Pull pad out from under
buckle cover and work it
off the shell.
4
5
Push harness guide lip
toward outside of shell
with one hand while pulling
harness guide from the
front with the other.
Cleaning Seat Pad
If your seat pad has a machine washable tag:
Machine wash all pieces separately with cold water on a gentle
cycle. Make sure infant insert is closed so fastening strips are not
exposed. Tumble dry separately for 10-12 minutes on low heat.
Remove immediately.
If your seat pad does not have a machine washable tag:
Hand wash pad with warm sudsy water, rinse clean and air dry.
Do not use bleach or use other harsh cleaners. Do not dry clean.
Cleaning Harness Strap
Spot clean the harness straps.
