Place child restraint
flush
against the back of the vehicle
seat
forward-facing
in the
back seat.
The semi-recline position is to
be used only to install the child
restraint flush against the back
of the vehicle seat back, if
needed.
Thread the vehicle lap belt or lap/shoulder belt
combination through the belt path and out other side.
Buckle.
32
33
Forward-Facing Use: 22-50 lbs. (10.1-22.6 kg), 29-45” (73.6-114.3 cm), at least 1 year of age.
Forward-Facing Installation
WARNING
!
After deciding whether to use your vehicle belts or
lower anchor belt, be sure to read the warning below as
they pertain to both systems.
A loose lower anchor belt can result in
serious injury or death.
When lower anchor belt is
not being used, fasten belt
hooks together behind the
child restraint as shown.
Forward-Facing Installation with
Vehicle Belts:
2
3
Place hand or knee in
the child restraint and
push down firmly while
pulling up on belt to
tighten. For a manual
belt, refer to “Knowing
Your Vehicle Belt”
section.
continued on next page.
Check if your vehicle
belts will work with this child
restraint
This is very important because
not all vehicle belts will work
with child restraints.
Review pages 19-21 and your vehicle owner’s manual to
determine what kind of vehicle belt you have and how to lock
a child restraint in place.
1
