15
7
Check Harness Height:
Determine which set of
harness slots works best
for your child. Adjust if
needed.
Rethread harness into new
harness slot location.
Make sure harness straps
do not twist.
11
Press red button on
buckle to release the
buckle plates. Pull buckle
plates out. Place harness
straps over sides of child
restraint.
5
6
Place the child’s bottom
and back flat against the
child restraint.This will
increase comfort and allow
the harness to properly
tighten.
Harness slot being used
must be
even with or
just below
the shoulders.
If the bottom harness slots
are above the child’s
shoulders,
do not
use this
child restraint until the
child grows into it.
Harness
Slot
8
14
continued on next page.
10
From the front of child
restraint, pull harness strap
out. Repeat for other
adjustment bracket.
Depending on your model,
press on harness retainer
release button and pull
apart (4A)
OR
push down
on tab (4B) and slide
harness out.
4A
4B
From the back of the child
restraint, remove free end
of harness from harness
adjustment bracket.
9
4358-3394E Designer USA 6/1/06 1:19 PM Page 17
