OPERATION
33
Moving Machine By Hand
ZT-2800 Bypass Linkages
When pushing or pulling the mower, engage the
ZT-2800 (Integrated Zeroturn Transaxle) bypass
linkages. The ZT-2800 bypass linkages are located on
the rear of the frame, below the rear engine guard.
Raise the deck into the highest cutting position.
1.
Pull the ZT-2800 bypass linkages up and out of
2.
the keyhole slots. Release the levers with the head
outside the frame and held in the bypass position.
To reengage the ZT-2800 to drive, reverse the
3.
above procedure.
Load the machine into truck or trailer by driving up
ramps in low gear. DO NOT LIFT! The machine is not
intended to be lifted by hand.
8058-032
Bypass linkage, ZT-2800 engaged
8058-033
Bypass linkage, ZT-2800 locked in the bypass position
WARNING!
Make no adjustments without:
the engine stopped,
•
the ignition key removed,
•
the parking brake activated
•
WARNING!
Use extreme caution when loading
the machine into a truck or trailer
using ramps. There is the possibility
of serious injury or death if the
machine falls off the ramps.
Summary of Contents for RAM 48ZT
Page 49: ...49 WIRING DIAGRAM 8053 002...
Page 58: ...58 SERVICE JOURNAL Action Date mtr reading stamp sign...
Page 59: ......
Page 60: ......
