OPERATION
28
8011-642
Jumper cable connection
IMPORTANT INFORMATION
The mower is equipped with a 12-volt negative
grounded system. The other vehicle must also
be a 12-volt negative grounded system. Do not
use the mower to start other vehicles.
If the battery is too weak to start the engine, it should
be recharged. (See
Battery
in the
Maintenance
section.)
If jumper cables are used for emergency starting,
follow this procedure:
Connection
Connect each end of the RED cable to the
1.
POSITIVE (+) terminal on each battery, taking
care not to short against chassis.
Connect one end of the BLACK cable to the
2.
NEGATIVE (-) terminal of the fully charged battery.
Connect the other end of the BLACK cable to a
3.
good CHASSIS GROUND on the mower with the
discharged battery, away from the fuel tank and
battery.
Removal - reverse order
Remove BLACK cable first from chassis and then
1.
from the fully charged battery.
Remove RED cable last from both batteries.
2.
WARNING!
Lead-acid batteries generate
explosive gases. Keep sparks,
flame and smoking materials away
from batteries. Always wear eye
protection when around batteries.
Weak Battery
Summary of Contents for RAM 48ZT
Page 49: ...49 WIRING DIAGRAM 8053 002...
Page 58: ...58 SERVICE JOURNAL Action Date mtr reading stamp sign...
Page 59: ......
Page 60: ......
