OPERATION
25
Before Starting
Read the sections Safety Instructions and
•
Controls before starting the machine.
Perform the daily maintenance before starting
•
(see
Maintenance Schedule
in the
Maintenance
section).
Check that there is sufficient fuel in the fuel tank.
•
Adjust the seat to the desired position.
•
The following conditions must be fulfilled before the
engine can be started:
The driver must be seated on the seat.
•
The blade control lever for engaging the mower
•
blades must be down in the lower position.
The parking brake must be on.
•
Both steering controls must be in the locked
•
(outer) neutral position.
Starting the Engine
Sit on the seat.
1.
Raise the mower deck by pushing the release
2.
button on the top of the lifting lever. Pull the lifting
lever backward to the locked position (transport)
position.
Activate the parking brake by pushing the release
3.
button in and pulling the lever fully upwards.
8058-019
Set mower deck to transport position
8052-001
Depress blade switch
Disengage the mower blades by pressing the blade
switch downwards.
8058-020
Pull parking brake upwards to activate.
Summary of Contents for RAM 48ZT
Page 49: ...49 WIRING DIAGRAM 8053 002...
Page 58: ...58 SERVICE JOURNAL Action Date mtr reading stamp sign...
Page 59: ......
Page 60: ......
