12
Screw fastening process
4.Set up functions
Functions
Settings
Description
Remark
1.
Auto learning
mode
P
+
S
->SL->SC->At->RC->SP->HC->LC->Ht->LT-->END
(Complete process)
Step1: Step1: Press P+S simultaneously for 5 sec., screen
will be flashing and greed LED will be on.
Step2: Start to set up functions step by step until shows HC,
use actual workpiece and screw to set up HC. (max.
fastening no. of thread)
Step3: When setting completes, press S to save settings.
Settings will be saved after screen flash 2 times.
1. If no workpiece and
screw were not used
during HC setting. It
will auto save as 99.9
2. After HC settings
complete, HT and LT
will also be shown.
2.
Connection to
wireless
controller
Up+Down
Set up this function to connect to wireless controller
(KL-WSCBSN)
1. Default set as not connected. Press Up+Down
simultaneously for 10 sec. to change connection status.
2. To disconnect, press Up+Down simultaneously for 10 sec.
to disconnect
