Dixie Narco FLEXPAK 3000 DMV 72N, Programming/Set-Up/Configuration/Troubleshooting/Operation/Parts Manual

Page: 33 / 61

SYMPTOM POSSIBLE CAUSE THINGS TO CHECK WHAT TO DO
Vender Secondary pricing set. Go to "S-P2" and check if on. Disable "S-P2".
changes a set
price to *.10 cents
Select panel harness Check harness for backed Repair or replace damaged or
on its own. to door control board. out or cut wires. bad parts.
* (.10 cents Check harnessing from door Repair or replace damaged or
could be any control board to cabinet control bad parts.
value) board.
Cabinet Control Board. Check harnessing to and from Repair or replace damaged or
cabinet control board. bad parts.
Replace cabinet control board.
Control board Cabinet Control Board. ---- Replace cabinet control board.
looses memory
when power is
shut off to
vender.
Display
Cabinet Control Board. Check harness for backed out Repair or replace damaged or
continuously or cut wires. bad parts.
scrolls "uAIt". Replace cabinet control board.
Scrolling "1-1" Select panel harness Check harness plugged to Plug in.
on display. to door control board. door control board.
Check harness for backed
Repair or replace damaged or
out or cut wires. bad parts.
Door control board. Check harness from select Repair or replace damaged or
buttons to door control board. bad parts.
Cabinet Control Board. Check harness from door Repair or replace damaged or
control board to cabinet control bad parts
board. Replace cabinet control board.
Menu Lock-Up. --- --- Power down vender. Power
vender back up. Cycle the door
switch. "StS InIT" will scroll
across the display. Press select
button 1 to reinitialize. You
should now be able to access
the menu.
Scrolling "Not In Vend Sensor Check vend sensor harness. Repair or replace bad parts.
Service". Vend sensor alignment. Align vend sensors.
Replace bad parts.
Row Harness. Check row harness for bare, Repair or replace bad parts.
cut, or mashed wires.
Stack / Cabinet Check row harness for bare, Repair or replace bad parts.
Communication Harness. cut, or mashed wires.
Page 32