manualshive.com logo in svg

dixell iPro SERIES, Installing And Operating Insructions, Page: 57 / 72

Share
Download
dixell iPro SERIES Installing And Operating Insructions Download Page 57

 

1592025700 IPROFAMILY stp GB 2012.08.08.doc 

iPro Series 

 

57/72 

7.3 

CONNECTION OF THE ANALOGUE INPUTS 

The analogue inputs in the programmable controllers and expansions are fully configurable. NTC or PTC, 0 - 
20mA, 4 - 20mA, 0 - 10V, 0 - 1V or 0 - 5V type of sensors can be used. 
The analogue inputs can also be used as digital inputs (potential free - not live). 
 
NOTE: Any devices that require 24Vac/dc power supply must be powered separately with another 
transformer. 
 

7.3.1 

Temperature probes (NTC and PTC) 

2-row sensors that do not require polarity to be respected. 
Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the common (PbC) as 
shown in the diagram below. 
 

IPG-IPC

 

 

 

 

 

IPG-IPC 4 DIN 

   

 

 

Recommendations: 
- follow the diagram of the device used, for the numbering. 
- the configuration is determined by the application. 
- if used as a digital input (potential free - not live), use the same connection configuration of the sensors. 
 

7.3.2 

Pressure transducers and current probes (0 - 20mA, 4 - 20mA) 

2-row sensors that r12Vdc power supply. 
Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the power supply (+12V) 
as shown in the diagram below. 
 

IPG-IPC      IPG-IPC 

4 

DIN 

 

 

 

 

 
Recommendations: 
- follow the diagram of the device used, for the numbering. 
- the configuration is determined by the application. 

Summary of Contents for iPro SERIES









































































Reviews:

No comments