1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc
19/42
13.1 PROBES VISUALIZATION
Press
key to visualize the value of the probes configured in the Ichill and I/O
expansion (press
or
to visualize all the probes).
13.2 SET POINT VISUALIZATION / MODIFICATION
Press
key to read the value of the set point (cooling set point if the Ichill is in cooling mode,
heating set point if the Ichill is in heating mode, cooling and hating set point if the Ichill is in STD_BY or
remote OFF, Domestic hot water when enabled).
It is also possible to read the status of the Energy saving, the status of the Dynamic set point and the
real value of the set point if the Energy saving or Dinamic set point are active.
To modify the set point (Cooling, Heating or Domestic hot water):
press
or
to select the value of the set point
press
press
o
to modify the value
press
to confirm the operation
