1592015620 Quick reference guide iCHILL 200D EVO FW 4.5 rel. 1.0.doc
12/42
Push once
To turn ON or turn OFF the controller (in chiller or
heat pump depending from CF58 parameter)
Push once
To enter the function Menu
Push for 3 seconds
To set the clock (controller with clock on board)
Pushing once during the
programming
To exit from a group of parameter
7.1 KEY COMBINANTION
KEY
ACTION
FUNCTION
+
Push for 3 seconds together
Enter the programming parameters
Only in Pr3 level: push SET and
DOWN key
Select the parameter level visibility Pr1 / Pr2 /
Pr3
+
Push once together
Exit the programming parameters
Push 5 seconds in heat pump
mode
Manual defrost
+
Only in Pr3 programming level:
push SET and then the MENU
key
In Pr3 defines if the parameter can be
modified or not in the other levels.
8. FIRST INSTALLING
8.1 ON BOARD CLOCK (OPTIONAL)
If giving power supply the bottom display shows “
rtC
” alternated to a temperature or pressure value,
It
is necessary to set the RTC (Real time clock).
The internal clock is an option of the instrument and it is not possible to update it.
It is necessary to order the instrument already complete of this features.
If the instrument is disconnected to the power supply for more than 3 days, it is necessary to setup the
clock.
