１０
WIRING DIAGRAM
GENERAL OVERVIEW
Use minimum of power source 12VDC, 5A / 24VAC, 2.5A
Connect the VIDEO-OUT jack to the VIDEO-INPUT of the device.
As the connecting method varies with the equipment, refer to the manual supplied with
the equipment.
Always make sure that the camera’s power is off when connecting the cables.
The camera is supplied with second video output on the camera housing. To use this
feature along with a service monitor, second monitor cable is required.
Using a RS-485 communication, it will be able to control the ZOOM/FOCUS and OSD menu
from the controller or through the DVR. RS-485 does not allow star connection layout. It
must be in a daisy-chain configuration. An amplifier/repeater is required to extend over
1.2km in distance.
