Copyright © 2015 DivioTec Inc. All rights reserved.
8.2.1.3.
DDNS
In the Network-Settings-DDNS sub menu, user can select DDNS provider to configure
the Dynamic DNS.
To configure DDNS settings:
1.
Enable Network-WAN setting. Ensure the WAN networking setting is properly
configured and system is able to connect to internet.
2.
Select
ON
to enable DDNS
3.
Enter the
Domain Name
.
4.
Choose the
user name
and
password
.
5.
Click
Apply
to save the settings.
The built-in DDNS allows user to enter
urDDNS
settings.
Prerequistes of urDDNS:
1.
Enable Network-
WAN
setting. Ensure the WAN networking setting is properly
configured and system is able to connect to internet. Please refer to
8.2.1.1 WAN
Settings.
2.
Select
On
to enable DDNS.
3.
Input
Built-in DDNS
domain name.
4.
Click
Apply
to save the settings.
5.
If DDNS is applied successfully, it will pop up
Success
message. If DDNS account
is
not registered successfully, it will pop up
Failed
message. Once it pops up Failed
message, user needs to check network setting to ensure NVR to internet without
problem. Or users probably use the same domain name as others’ so please use
another domain name to register DDNS account to ensure the registration