DivioTec SRA212N-004P4 User Manual Download Page 107

Page: 107 / 128

Note

Without administrator privilege, user is unable to add the selected device to CMS Pro.

11.5.2.

Remove or Edit or configure device setting

Simply click on the mouse right button on the selected device from the list and choose

the corresponding buttons to edit or remove or configure device setting.



Device Setting

–

Once the IP address, user name or password of the selected device

has been changed, user can input the new information in the device setting.



Delete Device

–

User can remove the device from the device list in the delete

device.



Playback- User can playback the device’s video.



Open in web browser-By click Open in web browser, user is able to access the

device’s web viewer to configure this device.



Reboot system- User can click this button to reboot the specific device.

Summary of Contents for SRA212N-004P4

























































































































Search results

Summary of Contents for SRA212N-004P4

Reviews:

DivioTec SRA212N-004P4, User Manual, Page: 107 / 128

Search results

Summary of Contents for SRA212N-004P4

Reviews: