DivioTec SRA212N-004P4 User Manual Download Page 37

Page: 37 / 128

To export the video from NVR hard disk to external USB drive device or self-powered

USB external hard drive.

6.1

Export Video

Insert a USB drive or USB external hard drive into NVR USB port.

Click

Export

button

to bring up the Export menu shown as below. Export

video files to external USB drive.

Select the video file by input the below data.



Start Time

: Click on the date/time, the calendar will pop up on the screen for user

to select the date and input the start time.



Record Duration

: Input the data duration to be exported.



Channel

: Select the channels to be exported.

The video files will be shown in the list. The total data size and available external

storage size will be shown under the list.

User can assign the recording path by clicking the “

Open Folder

” icon.

Click

Start

to execute the exporting process and wait for it complete.

User can view the exported video by the Export Player. Click Export Player to

download to the USB drive if the user does not have the Player installed. To playback

the exported file by using the steps in

Chapter 7 export player.

Summary of Contents for SRA212N-004P4

























































































































Search results

Summary of Contents for SRA212N-004P4

Reviews:

DivioTec SRA212N-004P4, User Manual, Page: 37 / 128

Search results

Summary of Contents for SRA212N-004P4

Reviews: