25
Filtration
Your spa is pre-programmed to run a 2-hour filter cycle twice a day. For
the system to work properly, the filters must be hosed off at least once
a week and thoroughly cleaned once a month with a filter degreaser. A
dirty filter will restrict water flow and will prohibit the filtering system
from keeping your spa clean. If the filters are not cleaned for extended
periods, it could possibly damage the pumps.
If you have a problem with floating contaminants, you may want to pur-
chase a skimmer net to easily remove bugs, leaves, etc…
Details on cleaning the filters are included in the maintenance section, but
as a reminder, it is important to first turn off the power to the spa. Leaving
the power on while changing the filters could allow objects to be drawn
into the heater and/or pump and may damage your equipment.
To remove filters, double cartridge
(50 sq/ft per filter):
Slide door face upwards.
Remove door face.
Pull out leaf / skimmer
basket.*
* Ensure that the leaf / skimmer basket flange is alligned
in the grooves when returning leaf / skimmer to the
housing.
Gently unscrew and remove
both filters.
Clean or replace filters.
Note: be sure not to over
tighten filters when replacing.
Ozone Generator
Divine Hot Tubs™ Deluxe has an Ozonator made to our specifications. Ozonators supply
the spa water with ozone, which is an extremely effective oxidant that will kill bacteria
and microorganisms. The Ozonator will distribute ozone into your spa automatically
during the filter cycles and will keep your spa and water sparkling clean. Even though
ozone is effective at keeping your water clean, it cannot replace the use of an effective
sanitizer. Refer to the chemical section for more information.
No maintenance is necessary on the ozonator. The ozonator works during the filter
cycles set by the controller only.
CAUTION!
Turn off the
power to the
spa before
removing
the filter!
For the best
performance
possible,
clean the
filter weekly.
