ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK
11/8/16
CREATED DRAWING
REV.
A
-
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
FORWARD VISION III
FORWARD VISION III
ASSEMBLY INSTRUCTIONS
REV A
5 OF 7
NTS
EMK
11/8/16
NAME
DATE
DESCRIPTION
ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 6:
WITH HELP FROM ANOTHER PERSON, STAND WORKSTATION FRAME UP. POSITION FRAME UP TO CABINET. ATTACH L BRACKET
ONTO APRON WITH SCREWS PROVIDED. ATTACH BRACKET ONTO BACK OF WORKSTATION WITH THE REMAINING SCREWS.
STEP 5:
SLIDE LEG BOOT ONTO LEG WITH
FLARED END TOWARDS BOTTOM
OF LEG. SCREW LEG LEVELER
INTO T-NUT ON BOTTOM OF THE
LEG. REPEAT FOR ALL LEGS. SET
WORKSTATION FRAME ASIDE.
CLOSE UP OF LEG LEVELER AND
LEG BOOT ASSEMBLY
LEG LEVELER
LEG
BOOT
L BRACKET - TYPICAL
RIGHT SIDE OF WORKSTATION SHOWN
ATTACH WORKSTATION
FRAME TO CABINET HERE
(REPEAT ON OTHER SIDE)
LEFT SIDE OF WORKSTATION SHOWN
WORKSTATION FRAME
FRONT OF WORKSTATION
STEP 4:
INSERT HANGER BOLT ON ONE OF THE LEGS THROUGH
THE CORNER BRACKET AND INSERT LOCK WASHER
AND HEX NUT. TIGHTEN NUT USING
1
2
" WRENCH OR
1
2
"
SOCKET AND TORQUE WRENCH, TO A MINIMUM OF
12FT LBS BUT NOT TO EXCEED 17FT LBS. REPEAT FOR
OTHER CORNER LEG.
INSERT HANGER BOLT
THROUGH HERE WITH LOCK
WASHER AND HEX NUT
CLOSE UP OF CORNER BRACKET ASSEMBLY
CORNER
LEG
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\2924K & KF, 2926K & KF, 2964K & KF,
2966K & KF SERIES.dwg, 12/2/2016 11:38:46 AM, DWG To PDF.pc3