ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK
11/8/16
CREATED DRAWING
REV.
A
-
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
FORWARD VISION III
FORWARD VISION III
ASSEMBLY INSTRUCTIONS
REV A
4 OF 7
NTS
EMK
11/8/16
NAME
DATE
DESCRIPTION
ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 1:
POSITION THE TWO CABINETS IN DESIRED LOCATION. MAKING SURE DOOR
HINGES ARE ON THE OUTSIDE. (IF YOU HAVE A "K" SERIES UNIT, PLACE UNIT
OVER UTILITY HOOKUPS). LEAVE ENOUGH ROOM IN BETWEEN CABINETS FOR
REMOVABLE PANEL. LEVEL CABINETS AND ATTACH TO FLOOR.
STEP 2:
ATTACH REMOVABLE PANEL WITH THE SCREWS PROVIDED TO THE CLEATS
ON SIDES OF LEFT AND RIGHT CABINETS BY DRILLING PILOT HOLES THROUGH
CLEATS. POSITION REMOVABLE PANEL SO THAT BOTTOM HOLES ARE MORE
THAN 4" ABOVE FLOOR. ATTACH BACK PANEL TO BACK OF CABINETS WITH
THE SCREWS PROVIDED INTO MOUNTING CLEATS LOCATED INSIDE ON TOP
AND BOTTOM OF BOTH CABINETS.
STEP 3:
LAYOUT WORKSTATION FRAME WITH SQUARE EDGES OF APRONS ON THE
FLOOR, ROUNDED EDGES FACING UP. CONNECT THE LONG APRON AND
SHORT APRON TOGETHER BY USING THE CORNER LEG BRACKET. MAKING
SURE BRACKET IS FLUSH WITH THE SQUARE EDGES OF APRONS. REPEAT ON
OTHER BRACKET.
18.00"
LEFT CABINET
RIGHT CABINET
REMOVABLE PANEL
CLEATS
BACK PANEL
TOP MOUNTING CLEAT - TYPICAL
ATTACH BACK PANEL TO TOP AND BOTTOM
MOUNTING CLEATS FROM INSIDE OF CABINET
OF BOTH CABINETS
(BOTTOM MOUNTING CLEATS NOT SHOWN)
SHORT
APRON
LONG
APRON
SQUARE EDGES FACING DOWN
CLOSE UP OF CORNER BRACKET ASSEMBLY
CORNER BRACKET
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\2924K & KF, 2926K & KF, 2964K & KF,
2966K & KF SERIES.dwg, 12/2/2016 11:38:41 AM, DWG To PDF.pc3