Diversified Fall Protection, LLC.
Portable Truss Anchor Instruction Manual – V 1
www.fallprotect.com
Copyright Diversified Fall Protection 2013 ©
Page 12 of 16
VII.
Specifications and Parts
A. System as an assembly is rated for a 310 pound user. Contact DFP if 420 pound capacity is required
B. Portable Truss Anchor (See Figure 20)
Main Body
•
Material : ½” Thick A36 Steel
•
Finish: Powder Coat Safety Yellow
Threaded Attachment
•
Material: Plain Steel – Rockwell Hardness B75
•
Right hand thread
•
¾” Diameter
•
Finish: Powder Coat Safety Yellow
Weld
•
Weld by AWS D1.1 Certified welder in conjunction with the requirements of OSHA
•
Electrode has a minimum tensile strength of 70 ksi
Maximum Allowable loading
•
One (1) 420 Pound User
o
When used independently of this system
•
Mass Arresting Force of 900 Lbs
C. Extension Pole (See Figure 21)
Main Body
•
Material: smooth 1-¼”round fiberglass handle
•
Color: Yellow
•
Reach: 6’-18’ (1.8m-5.4m) 3-section extension pole
Telescoping Slider Tubes
•
Size: 1” (2.5 cm) and 7/8”(2.2 cm) diameter round
•
Material: aluminum
•
Finish: Clear anodized
Threaded End
•
Material: Cast Aluminum
External Locking Device x2 (See Figure 22)
•
Material: Plastic
•
Mechanism: Compression lock with course threads
•
Color: Outer sleeve is black
Internal sleeve is red
Handle Grip
•
Black rubber grip
Clamp and Eyebolt
•
Body: Zinc plated steel
•
Liner: UV-resistant EPDM Rubber , ASTM E-84
•
Meets Buy America Act
•
Eyebolt: 3/8”-16 Steel Zinc Plated 144 pound work load Limit
•
Screw Protector: Black pliable vinyl with a durometer of 75A
Figure 20 - Anchor
Dimensions
Figure 21 -
Extension Pole
Figure 22 -
External
Locking
Device on Pole
