Diversified Fall Protection, LLC.
Portable Truss Anchor Instruction Manual – V 1
www.fallprotect.com
Copyright Diversified Fall Protection 2013 ©
Page 10 of 16
13. Check connection physically by pulling downwards on the pole.
14. Disconnect snap hook from eye bolt. See Figure 18.
15. While standing on the ground, connect to back D-Ring of full body harness following the manufacturer’s
instructions. See Figure 19.
Figure 18 - Disconnect Snap Hook
NO!!
Figure 16 - Anchor is not
properly rotated
Figure 17 - Obstruction
preventing anchor from sitting
on truss
Figure 19 - Connect Snaphook to Harness
Anchor Rated for 420 Pound Capacity
Entire System Rated for 310 Pound Capacity