Diversified Fall Protection, LLC.
Portable Truss Anchor Instruction Manual – V 1
www.fallprotect.com
Copyright Diversified Fall Protection 2013 ©
Page 11 of 16
16. It is now safe to ascend up ladder, steps, or stairs.
17. To disconnect, descend to ground level. Then repeat steps 1 - 16 in reverse.
D.
Thoroughly inspect equipment for damage before each use.
E.
The anchor must be above the user’s head. Keeping the anchor directly above the user will help prevent swing falls.
This will minimize injury and prevent death in the event of a fall.
IV.
Training:
A.
It is the responsibility of the end user to be familiar with these instructions regarding use of the portable truss anchor
system. The end user is also responsible for the correct care, use, characteristics, limitations, and consequences of
misuse of this equipment.
B.
Training is to be conducted prior to initial installation of the system. It should also be repeated on a regular basis.
Training must be performed without the user being exposed to an actual fall hazard. The end user is to keep training
documentation on file.
V.
Inspection:
A.
The portable truss anchor is to be inspected for damage (bends, cracks, excessive wear, signs of permanent
deformation)
before each use
.
B.
A formal inspection of the entire system shall be conducted at least annually. This inspection shall be performed by a
competent or qualified person that is not the end user. The results are to be recorded in the inspection and
maintenance log.
C.
Inspection Procedure:
•
Inspect portable truss anchor for any damage or corrosion. Pay close attention for any signs of permanent
deformation such as cracks or wear that could jeopardize the integrity of the strength of the system.
•
Inspect the truss attachment points. The anchor must be securely positioned on the truss.
•
Inspect all system components.
•
Make copies of the inspection log included at the end of this manual. Use it to record inspection results of all
components used with the anchor.
D.
If inspection reveals any damage or unsafe conditions, immediately remove anchor from service and contact
Diversified Fall Protection for further instructions.
VI.
Maintenance
•
Clean the portable truss anchor with a mild solution of soap and water. This will prevent excessive build-up of
dirt and other debris that could prevent proper operation.
•
Store equipment in a secured clean, dry, and non-corrosive environment.
•
Keep equipment records which contain data pertaining to any maintenance or incidents.
