Note: The sense of intensity may actually depend on the respective daily constitu-
tion. Therefore, the intensity may be adjusted to the personal needs by the user.
The snore stopper also reacts to snoring noises above 65 dB (decibel) emitted from
third parties if the background noise in the room is below 55 dB (decibel).
Step 13:
Open the hook and loop fastener on the outside of the
wristband, loosen the band until the hook and loop fastener
reaches the wristband holder . Lift off the wristband
holder to unlock it from the housing (image 17).
Step 11:
If the device sends an electric pulse, the green LED
flashes during the duration of the pulse (image 15). If the
snore stopper detects a noise above 65 dB (decibel), the
green LED flashes once. If the red LED flashes, there
is no skin contact with the device. Please repeat step 9.
Step 10:
To test the strength of intensity, press the test button
three times in a row. The device activates an electric
pulse for about 5 seconds. If you feel that the intensity is
too low, increase and test the intensity gradually to
adjust it to your needs.
Step 9:
Switch on the device. Turn the on/off switch to intensity
level 2 (image 13). If skin contact is good, the green LED
flashes once. If skin contact is not good, the red LED
flashes once (image 15). In this case, tighten the band a
little and repeat step 9 until the green LED lights up.
13
Image 13
Image 14
Image 15
1
2
2
2
3
2
2
Image 16
Image 18
Image 17
6
6
Step 14:
Gently remove the snore stopper from the wrist. Now place
theprotective foil on the adhesive electrodes (image 18). The
adhesive electrodes will not get dirty and the useful life is
prolonged as a result of this. After 8 hours, the device will
switch off automatically. If the snore stopper will not be used
for a prolonged period, please remove the battery.
Step 12:
Please note that the device is set to the required intensity
level during the sleep phase. To end the therapy you must
first set the intensity button to “0”. Switch off the device
after waking up and remove the snore stopper from the
wrist (see step 13).
APPLICATION OF THE DEVICE
GB