Operating Instructions
64419 A 99/03
page 5 - 17
1.3
General safety instructions
•
The operating instructions must be kept permanently at the place of operation of
the machine and if possible attached at the point of installation in the immediate
vicinity of the machine.
•
The competent sales and service personnel must have read the operating
instructions before putting the coffee grinder into operation and be familiar with all
functions including action in the event of a fault.
•
If customers themselves operate the machine, a notice must be placed clearly
visible in the immediate vicinity of the machine that customers must immediately
call the service personnel responsible in the event of a fault and not try to eliminate
the fault themselves by tampering with the machine.
•
The machine must be placed in the sales areas so that the sales personnel
responsible can be reached by the customer without difficulty.
•
Only original spare-parts must be used for repairs to the grinder. If spare-parts
from other manufacturers are used, the serviceability of the grinder may be
impaired. In addition, further injury to persons or material damage cannot be
excluded.
•
The grinder should be installed out of reach of children. Children and users must
on no account reach into the openings or come into contact with electrical
components.
•
Only original grinding discs sharpened by DITTING must be used.
•
NEVER reach into the hopper opening while the machine is running.
•
NEVER touch electrical components with conducting objects, such as needles,
pins, cutlery, etc. !
•
The emission value referred to the workplace is 76 dB(A).
•
The machine must be electrically protected by circuit breakers or fuses according
to the nameplate and the local regulations.
