Operating Instructions
64419 A 99/03
page 16 - 17
6
3
4
-
Remove foreign matter. Check grinding
discs, rotating and stationary disc flange,
etc. for damage.
All supporting surfaces of stationary disc flange, rotating disc flange, grinding
discs and grinding case must be
absolutely clean
before assembly.
Only in this way can perfect grinding be guaranteed.
-
Then
re-assemble
parts
in
reverse
sequence. Tighten all screws.
-
Plug in power cable, switch on coffee
grinder briefly.
If the coffee grinder should block or there is a sound
of metal parts rubbing together, the scale setting
must be adjusted
according to 3.3.2.
-
Retighten screws
(6)
of the stationary disc
flange. For this purpose the cover lid
including hopper
(3+4)
must be dismantled
again and then re-fitted.
-
Perform basic calibration
according to
3.3.1.
4.2.3
Circuit breaker (KR 1203)
Thermal protector (KR 1403)
-
Set ON/OFF switch to OFF position.
- Grinder is switched off automatically.
-
Reset overcurrent release by firmly
- Allow the machine 10 to 15 min. to cool
pressing the red button underneath
down. Thermal protector will reset
bottom plate.
automatically.
-
The coffee grinder is again ready for
- The coffee grinder is again ready for
operation.
operation.
