TACHOMETER WITH DIRECTION INDICATION
•
The MICRA-D senses direction of rotation and
indicates polarity of the signal by means of LED’s
represented by up and down arrows. This function
requires programming the totalizer for up/down
PHASE or DIREC mode.
TACHOMETER WITH TOTALIZER COUNTER
•
The totalizer has the same scaling facilities as for the
counter configuration thus allowing to have two
simultaneous information of the same signal, for
example speed and flow.
13 programmable logic functions operated at the
rear connector enhance the functionality of the
meter and allow controlling basic operations
remotely.
In addition 18 commands through the serial port are
available to allow reading and changing the setpoint
values, request the display and reset to zero, etc...
Special software capabilities are program lock-out
for individual menus or the entire program
parameters, as well as the return to the factory
configuration.
Programmable display color (red, green or amber)
assignable to: programming, partial count value,
total, setpoints, relay activation etc.
6
This instrument conforms the following community standards: 89/336/CEE y 73/23/CEE
Warning: Refer to the instructions manual to preserve safety protections.
6
TACHOMETER WITH DIRECTION INDICATION
•
The MICRA-D senses direction of rotation and
indicates polarity of the signal by means of LED’s
represented by up and down arrows. This function
requires programming the totalizer for up/down
PHASE or DIREC mode.
TACHOMETER WITH TOTALIZER COUNTER
•
The totalizer has the same scaling facilities as for the
counter configuration thus allowing to have two
simultaneous information of the same signal, for
example speed and flow.
13 programmable logic functions operated at the
rear connector enhance the functionality of the
meter and allow controlling basic operations
remotely.
In addition 18 commands through the serial port are
available to allow reading and changing the setpoint
values, request the display and reset to zero, etc...
Special software capabilities are program lock-out
for individual menus or the entire program
parameters, as well as the return to the factory
configuration.
Programmable display color (red, green or amber)
assignable to: programming, partial count value,
total, setpoints, relay activation etc.
This instrument conforms the following community standards: 89/336/CEE y 73/23/CEE
Warning: Refer to the instructions manual to preserve safety protections.
