13
IP2373EN
NOTE
: for spare parts, refer to the spares price list.
5. Routine maintenance plan
Carry out the following operations and checks every 6 months or 36.000 cycles.
Disconnect the 230V~ power supply:
- Clean and lubricate the gate rotation pins, hinges and drive screw with neutral grease.
- Check the resistance of the fixing points.
- Check the electrical connections are in good condition.
Reconnect the 230V~ power supply:
- Check the power adjustment.
- Check all the commands and safety functions (photocells) are operating correctly.
- Check the release system is working correctly.
i
4. Release instructions
In the event of a fault or a power failure, open the window, insert the key in the relative lock and
turn it counterclockwise (as indicated by the arrow). Release the electric lock (if present).
Manually open the gate. To lock the gate again, close the hatch, turn the key anticlockwise and
remove the key.
WARNING
: the gate lock and
release operations must be
performed with the motor idle.
Do not enter within the operating
range of the gate.
