DITEC TRAFFIC C, Installation Manual, Maintenance, Use

Page: 37 / 52

- 37 -
0DT829 2016-04-01
F2 F1 F3
L3 L2 L1
FUS
E
F4
U W V
- LK +
RP TC ON
ON
1 2 3 4 5 6
11 12 17 IN SA POWER
NIO
SO EO
PRG
COM
EL07L
00000000000
www.ditec.it
17 14 12 11 0 0 0 1 1 2 3 4 6 8 9 20 41
1
3
9
4
LDV
LDR
20
EL07PW1
00000000000
ON
FUSES
ID Value Dimension Circuit
F1 - F2 - F3 8A - 500V 10.3 x 38 Three phase line
F4 3.15A - 230V 5 x 20 Transformer
ADJUSTMENT LIMIT SWITCH
1. Activate the door by pressing the appropriate buttons, and check it moves
in the correct direction and If necessary, reverse the movement direction
by modifying the phase sequence, adjusting the line wires upstream of
the main switch.
2. Carry the curtain in the closed position.
3. By means of a screwdriver, turn the “C” cam until the relative micro-switch
is triggered.
4. Carry out the same procedure for the opening limit switch: bring the
curtain to the open door position, and adjust cam “A”.
5. Activate the automation to check the calibration and, if necessary, make
a further adjustment.
C
A
C
A
49E
EN