Ditch Witch RT45 Operator'S Manual Download

Page: 179 / 199

Specifications - 178

RT45 Operator’s Manual

RT45 Tractor with H313 Trencher

Power Train

Ground drive transmission: hydrostatic drive infinitely variable from zero to maximum, foot pedal and
hand lever operated speed/direction control

Differentials: Dana model 44 (Dana model 60 optional)

Service brake: ground drive speed/direction control brakes machine hydraulically when moved to
neutral position

Parking brake: disc, hand-operated

Tires: Load rating at 10 mph (16 km/h)

standard 26 x 12.00-12 4-ply bar lug inflated to
20 psi (1.4 bar)

1780 lb

807 kg

optional 29 x 12.50-15 4-ply bar lug; inflated to 30
psi (2.1 bar)

2255 lb

1022 kg

Attachment drive transmission: hydrostatic, lever-operated speed infinitely variable from zero to

maximum forward with limited stroke reverse

Hydraulic System

U.S.

Metric

Ground drive pump capacity @ 2300 rpm

29.3 gpm

111 L/min

Ground drive pump relief pressure

3750 psi

258 bar

Attachment pump capacity @ 2600 rpm

29.3 gpm

111 L/min

Attachment pump relief pressure

trencher

5000 psi

345 bar

plow, saw

3750 psi

258 bar

Auxiliary pump capacity @ 2600 rpm

10.2 gpm

39 L/min

Auxiliary pump relief pressure

2500 psi

172 bar

Filtration: return/charge full flow; 15 psi (1 bar) bypass, 10 micron nominal

Summary of Contents for RT45








































































































































































































Search results

Summary of Contents for RT45

Reviews:

Related manuals for RT45

Brands by name

Popular brands

Ditch Witch RT45, Operator'S Manual

Search results

Summary of Contents for RT45

Reviews:

Related manuals for RT45

Brands by name

Popular brands