manualshive.com logo in svg

Ditch Witch ht25, Service Manual, Page: 14 / 103

Share
Download
Ditch Witch ht25 Service Manual Download Page 14

14

HT25 - CONTROLS

DESCRIPTIONS

14

HT25 - CONTROLS

DESCRIPTIONS

Windshield Wiper Switch

This optional switch controls 
windshield wipers.

•

Press right to turn on.

•

Press left to turn off.

Track Controls

These levers, used together, 
control left and right track speed 
and direction.

•

Push to go forward.

•

Pull to go backward.

•

Return to neutral to stop.

•

Use together to steer.

Engine Oil Pressure Indicator

This indicator lights when oil 
pressure is low. Light will come on 
briefly when engine is started. 

If light remains on:

•

Turn off engine.

•

Check oil level.

•

Check for leaks before starting 
engine.

Ic0225h.eps

Ic0227h.eps

ic1294.eps

Windshield Wiper Switch

This optional switch controls 
windshield wipers.

•

Press right to turn on.

•

Press left to turn off.

Track Controls

These levers, used together, 
control left and right track speed 
and direction.

•

Push to go forward.

•

Pull to go backward.

•

Return to neutral to stop.

•

Use together to steer.

Engine Oil Pressure Indicator

This indicator lights when oil 
pressure is low. Light will come on 
briefly when engine is started. 

If light remains on:

•

Turn off engine.

•

Check oil level.

•

Check for leaks before starting 
engine.

Ic0225h.eps

Ic0227h.eps

ic1294.eps

Summary of Contents for ht25








































































































Reviews:

No comments