v
English
www.disty.de
09/2019
6. New router or new DECT base station
You have received a new router and you want to book in your disty
box
300
on
this router? (This instruction applies to every new DECT base station.)
To book in
disty
box
300
at a new router or DECT base station, you have to reset
disty
box
300
first, this happens as follows:
Please connect
disty
box
300
either with an analog telephone or with your
multifunction device. Then interrupt
disty
box
300
power supply for 5 seconds.
Now dial
**990#
on the telephone keypad or the fax keypad in the multifunc-
tion device and wait for a short acknowledgement tone.
disty
box
300
is now in
its delivery state and can be re-registered according to the operating instructions.
7. After successfully booked in disty
box
300
you cannot make
a phone call or fax?
There are constellations of network connection and DECT base stations/routers
which require a different dialling procedure to reach the called subscriber, the
so-called
block dialling
.
Please change three parameters within your
disty
box
300
in order to dial by
block dialling in the future. How this is done is explained in the additional manual
“Operating instructions for the expert” on page 12, which can be found under
the following link: https://n-hoppe.jimdo.com/english/downloads/distybox-300
8. Can I connect an external bell
to disty
box
300
?
disty
box
300
supplies 60 V to operate an
external bell.
disty
box
300