Illuminated WindPro with Led
8
Remote Control
Each LED WindPro comes with 2 remote controls. The one with a
green
sticker
has been
connected with the frame and ready to use.
To
pair
the other remote control
with the WindPro
, follow the steps below:
a.
Turn on the unit by
switch
ing the power button to
the
"
I
" position
next
to the
battery
.
b.
Press "ON" button on the remote control for 5 seconds.
c.
Turn off the unit (switch the power button to "
O
") and wait for 5
seconds, then
power it back on again. Then press
"ON"
button on the
remote control.
d.
The frame will flash 3 times and light up constantly.
The brightness can be adjusted
to
either
"100%" or "50%"
with the remote
control
.
