background image

Illuminated WindPro with Led

4

INPORTANT SAFETY INSTRUCTIONS AND WARNINGS

Carefully read the below safety instructions and precautions before using

 

the 

product

 or charging 

the

 battery. 

F

ailure to do so may result in fire, 

personal injuriy and damage to property.

DO NOT short circuit the battery. It may cause fire or injury.

NEVER leave the battery unattended while being charged.

When the battery is fully charged, disconnect it with the charger.

DO

 

NOT overcharge, it will decrease the battery lifespan. A full charge

takes

 5-

6 hours.

Before and after each use, inspect the battery for damages, such as

swelling, broken cover, or other deformities. DO NOT use the battery if

any damage is found.

STOP using the battery immediately if the battery is extremely hot,

emits unusual smells or smoke, changes shapes, or appears abnormal in

any other way.

The battery can 

ONLY

 be charged with the provided charger.

 DO NOT

use the provided charger to charge other batteries.

DO NOT let the battery expose to moisture or contact with any liquid at

any time.

If the unit won't be used for a long time, remove the battery from the

base and store it in a dark, dry and fireproof place at room temperature.

NEVER store the battery near an open fire.

Store the battery fully charged. It should be re-charged once after 3

months not in use.

DO NOT disassemble, modify, drop or damage the battery.

 This may

result in damaging the battery or exposure of battery.

DO NOT use the battery if you suspect it's damaged in any way.

Battery and 

Charger cannot be repaired. In case of any damage, stop

using immediately.

Charge

Discharge

Storage (less than 30 days)

Storage (less than 90 days)

32

 °

F

 to 

104

 °

F

14

 °

F

 to 

122

 °

F

-

4

 °

F

 to 

32

 °

F

7

4±4

°

F

Limited W

arranty

:

Please refer to full Term and Conditions at www.displays2go.com.

Summary of Contents for ILLUMINATED WINDPRO WITH LED











Reviews: