Page 8
User’s Manual
Document No: ZBT-User C
supplied) through the leg and attach it to the internal RJ45 connector inside
the leg.
Note: We recommend you use a CAT 5 STP (shielded twisted pair) cable.
Route the external Ethernet cable supplied up through the leg and attach it to
the internal RJ45 connector inside the leg.
HDMI out
- Connect to an external display. (Secondary display)
If required connect the 2mtr HDMI cable supplied to an external display or
projector.
Route the external HDMI cable supplied with the product through the leg and
attach it to the internal HDMI connector inside the leg. Connect the other end
to your remote monitor or projector.
Please refer to drawings on Page 8 for more details on connections.
USB connection
- 1 x USB port is available on the side of the table to enable
connection to an external USB device such as a memory stick. For security, a
blanking plate is supplied in the accessory pack to restrict access to the USB
connector. Refer to images below:
The USB input is on the
left hand side of the table
Place the Cover Plate
over the USB input and
use the screws provided
to secure the plate
