22
23
Start Switch
reMoVe aND repLaCe
The start switch is located inside of the cabinet, behind
the push button assembly.
1. Remove control panel assembly (see Control Panel
Assembly, Remove and Re-install).
2. Remove start switch (2 screws).
3. Installation is the reverse of removal.
Access to Components
In order to access the electrical components, it is first
necessary to remove the cabinet cover.
reMoVe CaBiNet CoVer
1. Remove the bucket from the compactor (see
Cabinet, Trash Bucket).
2. Remove the door assembly, the (2) bottom door
gasket retainers (see Cabinet, Door Assembly).
3. Remove the back panel by first removing the Phillips
head screw that secures the power cord cable
clamp to the back panel, and then removing the 16
screws that secure the panel to the cabinet.
section D – electrical Components
SCREWS
SCREWS
BAG
STORAGE
SCREWS
CONTROL
PANEL
BACK
PANEL
SCREWS
SCREW
CABLE
CLAMP
SCREWS
