background image

Read all instructions before assembly and use of the change centre. 

Keep instructions for future use.

Safety Precautions

This product has been manufactured for a child with a maximum age of 12 months or a maximum 

weight of 14kgs.
Do not place more than 1kgs of goods in the mesh bag.

Be aware of the risk of open fires and other sources of heat, such as electric bar fires, gas fires, 

etc. in the near vicinity of the changing unit.
Use original accessories and manufacturer approved parts only.
Always ensure that the change pad locking tabs are locked in place when the change pad is raised 

and not in use.

Do not use this change pad if any part is torn, broken or missing. 

Ensure that the change centre is completely assembled and check that all parts are securely 

tightened before use.
Regularly check all parts for tightness - tighten or replace if required.
Promptly replace worn or broken parts.

   

WARNING:

DO NOT LEAVE YOUR CHILD UNATTENDED.
AL BRAKES ON CASTORS / WHEELS MUST BE APPLIED 
BEFORE PLACING YOUR CHILD ON THE CHANGE PAD OR 
IN THE BATH.
DO NOT ALLOW OLDER CHIDREN TO CLIMB OR PLAY ON 
THE CHANGE CENTRE

WARNING

Children have 

DROWNED

 

while using bath aids.

This is 

NOT

 a safety device.

ALWAYS

 keep baby within arm’s reach.

NEVER

 leave baby in care of children.

!

!

Summary of Contents for Starry Night Montana 057625-270













Reviews: