7
Assembly / Operating Instructions
Assembling top frame
1.
Place top frame long bars (80cm)
‘A’ into position and secure with
31mm bolts.
2. Attach top frame cross bars ‘B’
(39cm) to rearmost frame long bar.
3. Assemble plastic slider bracket to bath frame and bath frame
cross bar ‘C’ (68cm) as shown. Ensure bolt goes through
bracket and frame into cross bar. Also ensure that the frame is
on the same side of the change centre as the plastic clips on
the bottom of one side frame.
4. Slide slider bracket onto top frame
cross bars.
5. Attach top frame cross bars to
frontmost frame long bar.
6.
Slide front support frame onto bath frame by pushing in lock
pins. Ensure lock pins are fully clicked into position.
