Manual Timer allows you to set up a specific date and time where the receiver will turn itself
on if in standby or switch to the specified channel if already powered on.
Once a timer has activated, the receiver will remain on. To power the receiver down, press
the standby button. A maximum of eight timers can be set at once.
How to set up the Wakeup Timer
1. First set the Timer Mode to
Once, Daily
or
Weekly
. If this option is set to
Off
, the timer
will not operate.
2.
Services
is the only Wakeup Mode that is
available.
3. Set the channel you want the receiver to
power on to, or switch over to at the set date
and time.
4. Set the Date option to a desired date, on
which the digital receiver will turn on. Use the
left, right buttons on your remote to navigate
and change. The date format is DD/MM/YY.
5. Set the start Time option to a desired time,
at which the recording will start. Use the left,
right and number buttons on your remote to
navigate and change. Format is Hour:Minute.
6. Set the Duration option to a desired length
of time, in which the recording will finish. Use
the left, right and number buttons to navigate
and change.
Manual Timer
Main Menu
MAIN MENU:
13
