Troubleshooting
• 31 •
No Power Indicator
on Front Panel.
• Unplugged/ Switched Off.
Check the Power Supply is plugged into both the SNT7070
and Wall Socket correctly, ensuring the Wall Socket is
switched on and there is power available.
Power to SNT7070,
but NO Sound or
Picture on TV.
• HDMI cable is not
connected.
Check the HDMI cable used is securely connected
to both the SNT7070 and the TV.
• Incorrect input on the TV is
selected.
Check to see if the TV is set to the same HDMI
input the SNT7070 is connected to.
• The TV may be unable to
display the current output
resolution.
Menu - Settings - System Settings - HD Resolution
Adjust the resolution to suit the TV, use of another TV
or Monitor may be required to navigate Menus.
SATELLITE DISH
Database Empty
or Tuning Failed.
Signal Interference
or No Signal.
• Satellite Dish cable not
connected.
Ensure the cable from the Satellite Dish is connected
securely to the
SATELLITE IN
connection.
• LNB on the Satellite Dish is
faulty or LNB skew is incorrect.
We recommend consulting a Satellite Technician to check
the LNB skew or replace the LNB as required.
Align the Satellite Dish with correct Satellite (Optus D1).
Ensure there are no objects in the signal path.
SNT7070 is not
responding to
Remote.
• Batteries are incorrectly
inserted into Remote.
Ensure batteries correctly align with the polarity (+/-)
markings found in the battery compartment.
• Infrared receiver on the
SNT7070 is obstructed.
Check for clear line of sight between the Front Panel and
the Remote. Move any obstructions if necessary.
• The Satellite Dish may be
misaligned.
ANTENNA/AERIAL
Database Empty
or Tuning Failed.
Signal Interference
or No Signal.
• Aerial cable not
connected.
Ensure the cable from the UHF Aerial is connected
securely to the
ANTENNA IN
connection.
• The area has limited or no
Freeview Terrestrial coverage.
We recommend consulting an Aerial Technician to check,
or visit
freeviewnz.tv/get-freeview/
for more information.
Align the UHF Aerial to the closest transmitter with the
least amount of obstructions between it and your Aerial.
• The UHF Aerial may be
misaligned.
Picture distorted,
cropped, letterboxed
or expanded.
• The SNT7070 or TV Aspect Ratio
has been incorrectly set.
Menu - Settings - System Settings - Aspect Ratio
Adjust the Aspect Ratio (Auto, 4:3, 16:9) to suit the TV, or
consult your TV Manual to adjust the TV’s Aspect Ratio.
Issues with Recording
or Playback with
USB Device.
• The USB Device has insufficient
speed or performance.
While USB Flash Drives may work to record, they are
often inconsistent. Use of an Externally Powered Hard
Drive is always recommended.
Summary of Contents for SNT7070
Page 35: ...35...
