Main Menu - Installation
• 20 •
Terrestrial
Auto Channel Scan
To re-tune the SNT7070 at any time, use
this option. This will restore any channels
lost using carriers already pre-configured
with the SNT7070.
1. Select Auto Scan
and press
OK
.
2. Highlight YES and press
OK
to start the
Auto Scan.
3. Please allow a moment for the Auto Scan
to process and complete.
Manual Channel Scan
Scan a specific frequency in the broadcast,
such as Non-Freeview channels. Please be
aware that if you scan an existing frequency
that current channels fit into, you will lose all
bookings from the EPG.
1. Select Manual Scan
and press
OK
.
2. Select a Channel to scan, each Channel
has a preset Frequency. Select between
CH-26 (514000) and CH-47 (682000).
3. Alternatively, set a specific Frequency to
scan.
4. Set the Scan Mode. Select between FTA,
Scrambled or All.
5.
Press
OK
to start the Manual Scan.
6. Please allow a moment for the Manual
Scan to process and complete.
Stop a Auto/Manual Scan
Stop a Scan at any time, by pressing the
OK
button during the Auto/Manual Scan process.
Summary of Contents for SNT7070
Page 35: ...35...
