No Signal? No Channels?
Please ensure the following:
• Satellite Dish cable is connected?
• Using a Satellite Dish, not a UHF Aerial?
• Satellite Dish is aligned correctly?
• Cables/Connections are not worn?
First Time Installation
• 10 •
1
Step
Welcome Screen
The Welcome Screen should appear on your
TV* when the SNT7070 is first turned on.
Select Satellite, if using a Satellite Dish.
Press
OK
to confirm selection.
*If the Welcome Screen does not appear, go to
the
Menu
, select
Admin
then
Factory Reset
.
The Default Password is 0000.
2
Step
Tuning Channels
The Satellite Setup will now be displayed.
Ensure the Cable from your Satellite Dish is
connected to the ‘SATELLITE IN’ connection.
Press
OK
once confirmed.
You will be prompted with Region Selection
select the Region closest to your location.
Press
OK
to confirm selection.
This will start the Auto Channel Scan.
DO NOT push any buttons while the Auto
Scan is in progress.
Summary of Contents for SNT7070
Page 35: ...35...
