Manual Timer allows you to set up a specific date and time where the receiver will turn itself
on if in standby or switch to the specified channel if already powered on. The two available
modes Recording and Service will define what action the receiver will take.
When a timer recording reaches its end, the receiver will remain on. To power the receiver
down, press the standby button. A maximum of eight timers can be set at once.
How to set up the Wakeup Timer
1. First set the Timer Mode to
Once, Daily
or
Weekly
to make a recording. If this option is
set to
Off
, the timer will not operate.
2. Set the Wakeup Mode to
Recording,
Services
or Message. If you only want the
unit to wake up on a channel at the set time
without recording, set this to
Services
.
3. Set the channel you want to record, or set
the message you want to appear at the set
date and time.
4. Set the Date option to a desired date, on
which the digital receiver will turn on. Use the
left, right buttons on your remote to navigate
and change. The date format is DD/MM/YY.
5. Set the start Time option to a desired time,
at which the recording will start. Use the left,
right and number buttons on your remote to
navigate and change. Format is Hour:Minute.
6. Set the Duration option to a desired length
of time, in which the recording will finish. Use
the left, right and number buttons to navigate
and change.
17
Manual Timer
Main Menu
Summary of Contents for S8100-ZC
Page 1: ...S8100 ZC USER MANUAL...
Page 2: ......
