7
CONNECTION TO ANTENNA AND TV
1. Connect aerial cable to the ANT IN interface of your receiver.
2. Connect the receiver to TV with AV cable or HDMI cable.
1. Initial Installing
Following the
On-Screen
instructions to install channels.
1. Plug in the receiver.
2. Turn on your
TV and
select AV IN or the correct HDMI input.
3. Select the correct data according to users setup by press<up/down> and <ok>.
4. Press
“OK” to select “start search”, the receiver will then start to search channels.
Note: After searching has finished, the receiver will display a channel at random.
