Dish Network DISHPlayer 500, User Manual

Page: 29 / 40

27
Controlling Your VCR with the
Remote Control
Several of the buttons on the remote can be used to operate your VCR.
In order for the remote to control your VCR, it must be set up to work
with your VCR. See “Programming the Remote Control” on page 28 to
do this. Below is a diagram of the functions you can use with your
VCR
:
Note: To operate these functions on your VCR, make sure that the TV/
VCR SAT mode switch is set to TV/VCR. Otherwise, these functions
will operate the Personal TV functions (see previous diagram and
“Using the Remote Control” on page 4).
The functions shown above are the only functions that will operate
your VCR. To operate other functions on your VCR, use the buttons on
the VCR or remote that came with your VCR.
Pause video
Fast Forward
video
Play video
Record on
video
Rewind
video
Stop