29
for your VCR model.
5.
Press ENTER.
6.
Leave the TV/VCR SAT mode switch set to TV/VCR to operate
the VCR.
7.
For quick reference, write the number from step 1 down in the
table on the inside of the back cover of this manual.
The remote control is now programmed to control your VCR.
To verify that the remote control operates your VCR
Place a video tape in your VCR and press the Play button (
) on the
remote control (make sure the TV/VCR SAT mode switch is set to
TV/VCR).
If the remote control does not operate your VCR, repeat the steps on
the previous page using a different code listed for your VCR
manufacturer.
Note: Your television and VCR must have infrared (IR) remote control
receiving capability in order to be operated with the Personal TV
remote control.
When you’ve finished programming the remote control and want to
use it to control your DISHPlayer receiver, set the TV/VCR SAT
mode switch back to SAT.
Summary of Contents for DISHPlayer 500
Page 1: ...DISHPlayer 500 Personal TV Remote Control...
Page 37: ...35 Notes...
Page 38: ...36 Notes...
Page 39: ...CODES PROGRAMMED INTO REMOTE Television Code VCR Code...
