Page 8
Figure 2
3. Select
Check Switch.
The
Check Switch
screen will
open. Select
Check
.
4. The
Check Switch
procedure will run. When it
finishes, you will see an
Installation Summary
screen.
This screen should identify the installed switch as a
DP34. You should see “110” and “119” on the “Satellite,”
line, and the word “All” under both
1
and
2
. You should
also see the message “Satellite reception verified,” and
your LNBFs (“Devices) correctly identified. If your
system includes three satellites, you should see Dish
Input for three satellites, and all three satellites correctly
identified, as illustrated in Figure 3.
