Page 4
Warning
: The DP34 switch can be used
only
with
DishPro LNBFs and DishPro receivers. DishPro
products can be identified by the DishPro logo
shown below.
If your system has LNBFs that do not have the DishPro logo,
you
cannot
use the DP34 Switch in your system. However,
you
can
use the DP34 Switch if there are receivers in your
system that do not have the DishPro logo if you buy a
DishPro Adapter for each of these receivers. DishPro
Adapters can be purchased from your DISH retailer, or by
calling our Customer Service Center at 1-800-333-DISH
(3474)
Note
: The following instructions assume you have already
pointed your dish for the strongest possible signal, and have
run
Check Switch
with the DishPro LNBF connected
directly to the receiver’s
Satellite In
port. If not, you must
install the Dish, following the instructions that came with it,
before doing the following.
